G.PLANES 737NG PHOTO REALISTIC PANEL V1.0
FOR FS2004
G.Planes 737Ng Main Panel Functions
Main panel functions Pedestal functions Overhead Panel functions Radio stack
1=Auto Pilot CMD 1 on switch
2=Auto Pilot disengage switch
(before enabling the autopilot again you need to press the disengage switch once more)
3=Flap indicator
4=Gear indicator (don't land until you have the 3 greens)
5=Gear leaver
6=Main Eicas Engine control screen
7=Backup primary control Panel
8=Navigational Display Screen (ND) See function 18 and 17 on how to operated the ND
9=Primary flight display (displays primary information airspeed, alt, heading, Mac speed ect.)
10=Tail reg number (will change to the reg you have your plane set to.)
11=Radio function control
12=Clock
13=Quick start icons
14=Auto Brake systems
15=Ground Proximity Warning system (if it starts flashing clime away quickly)
16=Warning System (this will tell you if the engines need to be iced, pitot heat, hydraulic failure, power failure ect.)
17=Panel DUs (the left icon switches ND modes the right icon switches nav/gps mode)
18=ND and navigation control system (see below for detailed instructions on now to use)
19=Speed and Alt warning system (lights show spooler positions, and alt warnings)
20=Recommendation control system (lets you know if the plane thinks it should be on a/p, clime or descend, auto throttle armed ect.)
21=Autopilot, Approach and descend hold, Autothrottle.
22=Engine starters
23=Landing/ taxiing lights
24=Anti Collision ligts tail logo lights
ND navigation control screen
The ND control screen controls the navigational screen. Which displays ADF information, VOR information, airport info glide slopes, and much more.
Range Clear switches between modes so that you can view glide slops airport information to use this function you need to have the Panel DUs switch switched to normal. When you require switching to the rose (compass) mode of the ND, first press the Range On/Off button then switch the Panel DUs switch over.
Range On/Off turns the text of on the ND so that you can get a close look at the map.
Range in/out buttons allows you to zoom in/out on the ND map
The Bottom switches basically add allow you to view different navigation tools like the adf arrow, vor arrrow, radio text, glide slowp and much more.
Vor2 switch switches VOR radio modes.
Localizer switchs Localizer/Dme modes ect.